The Intellinet Network Solutions 5-Port Gigabit Ethernet PoE+ Switch passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports - four of which are high-power PoE+ PSE ports - this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps.
Power over Ethernet 802.3at
The Intellinet Network Solutions 5-Port Gigabit Ethernet PoE+ Switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimizes the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected.
Green Ethernet Technology
More often than not, a network switch does not utilize all of its ports at all times. Normally, when a computer, notebook, network printer or other network device powers down, the switch continues to consume the same amount of power as if it were active. To overcome this waste of energy, the Intellinet Network Solutions 5-Port Gigabit PoE+ Switch employs the new energy-efficient IEEE 802.3az technology, which detects link status to all connected devices and reduces the power usage of ports that are not in use. To facilitate maximum network performance, the Intellinet Network Solutions switch adjusts power output based on the length of the network cable that is connected to a particular port. When things slow down, it automatically scales back power usage to conserve energy and save money.
Features:
Provides power and data connection for up to four PoE network devices
Save installation cost by delivering data and power over existing network cables IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length
Power output up to 30 watts per port
PoE power budget of 60 watts
Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras)
Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
All RJ45 ports equipped with Auto-MDIX and auto-negotiation support
Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
Store and forward switching architecture
10 Gbps switch fabric
Supports jumbo frames up to 9 kBytes
IEEE 802.3x flow control for full duplex
Fanless design ideal for silent operation
Interfaces/Ports
Total Number of Network Ports:
5
Uplink Port:
No
Modular:
No
Stack Port:
No
Port/Expansion Slot Details:
5 x Gigabit Ethernet PoE+
Media & Performance
Media Type Supported:
Twisted Pair
Ethernet Technology:
Gigabit Ethernet
Network Technology:
10/100/1000Base-T
Network & Communication
Layer Supported:
2
Management & Protocols
Manageable:
No
Power Description
Frequency:
50 Hz
Frequency:
60 Hz
Power Source:
AC Adapter
Redundant Power Supply Supported:
No
Power Consumption:
70 W
Physical Characteristics
Form Factor:
Desktop
Height:
1.1"
Width:
5.5"
Length:
3"
Weight (Approximate):
1.57 lb
Miscellaneous
Package Contents:
5-Port Gigabit Ethernet PoE+ Switch
Power Adapter
Quick Installation Guide
Warranty
Limited Warranty:
3 Year
WARNING:
This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
This item ships directly from the manufacturer and is not stocked in our warehouse. If stock is available at the manufacturer, the item will ship directly to you, usually within 7 - 15 business days.
Once the order has been sent to the manufacturer it can no longer be canceled.
If payment is made via credit card it will be charged before the order is sent to the manufacturer.
You must contact the manufacturer directly regarding returns and defective items.
We will contact you by email if the item is sold out or backordered (and we were unable to update the site before you placed the order) or if the item will be delayed longer than expected.
We have no control over the speed of the manufacturer's order processing, or whether they will honor your request to ship the item by any particular method.