Intellinet Gigabit High-Power PoE+ Injector 561518
Provide both power and data to a Powered Device (PD) using existing Cat5 cable and this PoE Injector. The Intellinet Network Solutions Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant product to a non-PoE LAN switch port. The PoE Injector can power and supply a network connection to a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered PD. This injector has an output power rating up to 30 watts. That's enough for even power-hungry PoE devices. Reduce Wiring Costs. There's no need to run AC power lines to get your PD set up and ready to do what it's supposed to. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data. Protect Your Equipment. Once DC power is connected to your networked equipment through the Cat5e/6 cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages. |
Protection Type: | Overload Protection |
Protection Type: | Short Circuit |
Input Voltage: | 120 V AC |
Input Voltage: | 230 V AC |
Maximum Output Voltage: | 48 V DC |
Minimum Frequency: | 50 Hz |
Maximum Frequency: | 60 Hz |
Maximum Output Power: | 30 W |
Input Ports: | 1 x 100/1000Base-T |
Output Ports: | 1 x Gigabit PoE |
Height: | 1.3" |
Width: | 2.6" |
Length: | 5.4" |
Weight (Approximate): | 6.70 oz |
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. |
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
- UPC: 766623561518
- Mfr's Part #: 561518